NEW ASCENDER PLATFORM WITH NEXT-GEN MOUNTAIN BODY PANELS
The Ascender platform brings a whole new way to attack the mountain. Running boards are 1 in. narrower than previous designs and the overall profile is 10% narrower for improved side-hill performance, improved venting and ease of laying the sled over in deep snow. The revised bellypan shape allows the rider’s feet to move 2 inches further forward for even greater ergonomic options for riding. The drive shaft dropped 1.125 inches allows for a 9.7º lowered approach angle providing more maneuverability and the ability to get up and stay up on the snow. Improved fit and finish with easy on/off one-piece body panels allow easy access to the engine compartment and brings a distinctive Arctic Cat styling.
8000 C-TEC2 ENGINE WITH DSI
Introducing the most efficient and responsive 8000 engine from Arctic Cat. Fresh from our plant in St. Cloud, Minnesota, this 2-stroke engine features noticeably faster throttle response and acceleration compared with our previous 800, plus up to 30% reduction in oil consumption below 7000 rpm, 36% increase in low-end torque and 18% increase in midrange torque. Delivering a rare combination of increased power, reduced emissions, and ultra-low oil consumption, the overall crispness sets new standards for performance and rideability in the 160-hp class.
1.125" DROPPED DRIVESHAFT
Like the 2017 Mountain Cat, this 2018 M 8000 Sno Pro is fitted with the 1.125″ dropped driveshaft. The increased track-to-tunnel clearance of 3″ allows us to use 8-tooth drive sprockets on this model, giving you a flatter approach angle with more floatability and maneuverability. In addition, you’ll also notice a huge difference in your sled handling. This update delivers a more efficient power transfer to the snow, letting you enjoy more horsepower when climbing, carving, sidehilling and boondocking.
ARCTIC DRIVE SYSTEM WITH TEAM DRIVE AND DRIVEN CLUTCHES
The Arctic Drive System features TEAM Rapid Response II drive and Rapid Reaction BOSS driven clutch combination for smooth shifting, optimal performance, maximum durability; great serviceability; and reduced weight. The new Rapid Response II drive clutch features a roller bearing on the shaft that enables an autoadjusting belt tension design and delivers consistent performance without manual adjustments. It also features a 12.5 percent lower effective starting ratio (while maintaining the top ratio) for smoother engagement and reduced belt wear at drive-away speed, with more evenly distributed force for lower belt pressure. It’s a design that’s unique to Arctic Cat.
ARCTIC MOUNTAIN FRONT SUSPENSION WITH ARCTIC CAT GAS IFP SHOCKS
Lightweight, forged-aluminum spindles have less surface area than the previous design, reducing drag and improving performance in deep snow. Also, dual-phase high strength alloy-steel A-arms are lighter than previous designs. Arctic Cat 1.5 IFP gas shocks feature a hard-anodized aluminum body, 0.5″ shaft, aluminum internal floating piston, and high-quality seals and ice scrapers. For added strength, the eyelet on the shaft end is forged, replacing the welded design.
FLOAT ACTION REAR SUSPENSION WITH ARCTIC CAT IFP 1.5 SHOCKS
The FLOAT-ACTION rear suspension’s unique tri-hub rear axle system is engineered to be very light and very strong. The Arctic Cat 1.5 IFP coil-over shocks provide preload adjustment and are proven on the hill for reliability and stability.
DELUXE DIGITAL GAUGE
This dual configurable LCD screen gauge allows to you check all the vital information about your snowmobile and more. 14 different readings to be exact. There’s an odometer, speedometer, max RPM, 2 trip meters, engine hours, low oil light, coolant temperature, exhaust temperature, intake air temperature, battery voltage, fuel level, clock and reverse indicator.
Need to charge your phone or another electrical device? We’ve got you covered. Just plug in and power up while you ride.
HAND & THUMB WARMERS
Say goodbye to cold hands. Our hand and thumb warmers provide plenty of warmth and comfort on long rides.
153-IN. POWER CLAW TRACK WITH 2.6-IN. LUGS
This lightweight, 153″ single-ply track with a 3″ pitch sets the standard for deep snow performance. Stagger-set, curved-forward paddle towers won’t fold over. This track features a powder-devouring 2.6″ lug height.
HCR-TYPE HEAT EXCHANGER
Proven on our HCR model for the past four seasons, this exchanger is nearly 4 lbs. lighter than full-length versions. Plus it reduces snow build up to reduce even more weight.
Want to shift your weight? This puts the extra leverage you need right in your hands.
PROCLIMB - 7 SKIS
The ProClimb-7 mountain ski is 7″ at the tip, tapering to 6.5″ at the center. The wider skis enhance your carving abilities and prevent unintended downhill braking. A wider ski damper featuring a longer axle and bolt increases lateral adjustability.
VERTICAL STEERING POST, 4.5" RISER WITH ADJUSTABLE MOUNTAIN HANDLEBAR
Want to counter-steer on steep hills? This 4.5″ vertical post provides a more natural handlebar turning arc when you’re riding standing up.
All inventory listed is subject to availability and prior sale. Manufacturer's Suggested Retail Price (MSRP) if shown for a vehicle excludes set-up, freight, taxes, title, licensing or other dealer charges, and is subject to change. Individual prices may vary. Please request a quote for specific pricing.