Zeigler Motorsports Family

2016 KTM 350 EXC-F

2016 KTM 350 EXC-F
Orange/White
MSRP: $10,199.00
Manufacturer: KTM
Condition: New

Description

The 350 EXC is the ultimate machine when you want to ride your bike to the offroad trails. Thanks to its compact, powerful DOHC engine, its low weight and its perfectly tuned suspension, this machine masters each and every tough spot in offroad riding with ease. And thanks to its license plate, you can ride the bike right from your house and enjoy the street or the dirt.

Specifications

ENGINE

DESIGN
1-cylinder, 4-stroke engine
DISPLACEMENT
349.7 cm³
BORE
88 mm
STROKE
57.5 mm
STARTER
Kick and electric starter
TRANSMISSION
6-speed
PRIMARY DRIVE
24:73
SECONDARY GEAR RATIO
14:52
CLUTCH
Wet, DDS multi-disc clutch, Brembo hydraulics
EMS
Keihin EMS
 

CHASSIS

FRAME DESIGN
Chrome-molybdenum steel central-tube frame
FRONT SUSPENSION
WP USD Ø 48 mm
REAR SUSPENSION
WP PDS shock absorber
SUSPENSION TRAVEL (FRONT)
300 mm
SUSPENSION TRAVEL (REAR)
335 mm
FRONT BRAKE
Disc brake
REAR BRAKE
Disc brake
FRONT BRAKE DISC DIAMETER
260 mm
REAR BRAKE DISC DIAMETER
220 mm
CHAIN
X-Ring 5/8 x 1/4"
STEERING HEAD ANGLE
63.5 °
WHEELBASE
1482 ± 10 mm
GROUND CLEARANCE
345 mm
SEAT HEIGHT
970 mm
TANK CAPACITY (APPROX.)
8.5 l
WEIGHT READY TO RACE (WITHOUT FUEL)
107.2 kg
 

Features

250 AGILITY WITH 450 POWER

  • ENGINE The 350cc 4-stroke engine with a state-of-the-art electronic fuel injection offers a very wide power band and is distinguished by a dynamic but easy to control power delivery.
  • DDS CLUTCH The one-piece basket of the DDS clutch (damped diaphragm steel) is machined from solid high-tensile steel in one solid part together with the primary drive gear. This process guarantees unbeatable reliability and, together with the thin steel linings, contributes to the narrow engine width due to a compact rivet-less design. The diaphragm spring makes it possible to implement an additional rubber damping system inside the clutch hub, ensuring reliability for the transmission and excellent traction. Finally, the hydraulic clutch mechanism by Brembo in conjunction with the diaphragm spring provides a very light clutch operation and controllable modulation.
  • CYLINDER HEAD The DOHC cylinder head contains four ultra-lightweight titanium valves (intake 36.3mm, exhaust 29.1mm), which allow extremely high engine speed levels of up to 12,000 rpm in combination with very small, DLC-coated followers that weigh only 8g. The camshaft timing is perfectly tuned for performance in an enduro-specific low-rev range.
  • STARTER The engine is equipped with a kickstarter as well as an electric starter as standard. Well protected behind the cylinder, the electric starter is connected to the freewheel on the ignition rotor via the starter drive in the ignition cover.
  • GENERATOR The 350 EXC-F engine is equipped with a 196 W AC generator with integrated starter freewheel. The generator provides sufficient energy for the fuel injection, lighting and other electrical loads. Compared to the 350 SX-F, the oil-cooled rotor has a larger diameter with a bigger flywheel mass and requires a larger ignition cover.
  • VALVE TRAIN The crankshaft drives an intermediate shaft on the side which in turn drives the coolant pump and the two camshafts via the cam chain while at the same time acting as a counter balancer. A hydraulic chain tensioner ensures reliable chain tension to achieve highly precise valve timing.
  • CRANKSHAFT The 350 EXC-F has a heavier crankshaft in order to achieve a more even power delivery and better traction through greater rotating mass. The crankshaft employs a plain big end bearing, while two force-fitted bearing shells run directly on the crank pin. The necessary oil feed for this bearing is delivered by the engine's pressure lubrication. This design increases the engine's long-term durability, lengthening crankshaft service intervals - a customer benefit in terms of time, effort and cost.
  • TRANSMISSION The 6-speed gear box is specially matched to the power delivery of the 350cc engine and any kind of dual sport riding. It is distinguished by easy and precise shifting.
  • ENGINE MANAGEMENT SYSTEM (EMS) The Engine Management System by Keihin with electronic fuel injection and a 42mm throttle body ensures a spontaneous response and maximum engine performance.

BODYWORK

  • BODYWORK The bodywork has been designed ergonomically and functionally in such a way that the whole motorcycle is in perfect harmony with the rider down to the very last detail.
  • SPEEDO The speedometer by MAE integrates all the warning and indicator lights, except the turn signals, in a single unit. This gives the cockpit a clean and minimal look, with clear and readily available information.
  • AIRBOX The air filter can be quickly replaced without the use of any tools, thanks to an ingenious airbox design guarantees optimum filter protection from flying dirt while creating maximum airflow for high performance. The airbox covers are manufactured in a 2-component process with in-mold graphics. In addition, two extra flaps on the left cover allow it to be secured with bolts if desired.
  • FUEL TANK The large capacity fuel tank is constructed of lightweight polyethylene and specifically designed for off-road use. A ¼-turn bayonet filler cap features a release mechanism for quick and easy refueling.
  • HANDLEBAR All EXC models are fitted with the super strong, tapered Neken handlebar made of high tensile strength aluminum alloy. The proven standard KTM mount allows to fix the handlebar in four different positions. Hand guards made of a 2-component polymer ensure durability and effective hand protection.
  • GRAPHICS New graphics with clear lines visually underscore the exacting standards of what KTM deems a true, cutting-edge off-road dual sport bike.

SUPERIOR CHASSIS

  • FRAME The EXC's chassis is second to none and for 2016 the striking Factory orange frame color usually seen only on KTM's race team machines will return. The modern, lightweight frame design with exceptional quality and performance created by WP Performance Systems is made of lightweight, high-strength chromoly steel sections. Not only does it provide easy handling and precise cornering, but also outstanding stability.
  • COOLING SYSTEM The proven integrated KTM cooling system routes the coolant from the cylinder head through the frame triangle directly to the aluminum radiators made by WP.
  • SWINGARM The cast aluminum swingarm has been developed with state-of-the-art calculation and simulation software and constructed for minimum weight, optimum stiffness and precisely defined flexibility.
  • TRIPLE CLAMPS The triple clamps have been specifically designed for Enduro use and ensure precise handling on rough terrain by supporting the flex characteristics of the fork. This gives the rider the best possible feedback from the front-end of the machine to increase confidence and overall speed.
  • SUSPENSION The EXC models feature WP suspension, which is specifically designed for dual sport riding and ensures maximum traction comprised with plenty of comfort. As expected, the compression and rebound damping can be adjusted to suit various conditions and rider preference as well as separate high and low speed shock compression adjustments.
  • EXHAUST SYSTEM Light and robust. The aluminum silencers on EXC models are renowned for their outstanding performance, while keeping noise to a level well within FIM rules.

WHEELS AND BRAKES

  • WHEELS The EXC's feature new high-quality black anodized Giant rims with black spokes, that are mated to CNC-machined hubs and lightweight silver aluminum nipples for maximum stability at minimum weight. The EXC's feature Metzler Six Day DOT tires.
  • BRAKES High-Tech Brembo brakes have always been standard equipment on KTM off-road bikes, and combined with the lightweight Galfer Wave discs, they are the ultimate solution in braking technology. Being the class-leading brakes in off-road, they remain unchanged for 2016.
  • FRONT AXLE The front axle has been reduced in size from 26mm to 22mm to reduce weight and offer better front end feel. The adjusted offset and increased trail provides more stability.
  • FRONT FORK GUARDS The fork protectors have been adapted to the fork shoes and are also lighter. The open design offers the same level of protection while giving easier access to the fork legs for quicker cleaning and faster maintenance.

All inventory listed is subject to availability and prior sale. Manufacturer's Suggested Retail Price (MSRP) if shown for a vehicle excludes set-up, freight, taxes, title, licensing or other dealer charges, and is subject to change. Individual prices may vary. Please request a quote for specific pricing.

Request Quote or More Information








Cycle Parts Nation
5001 Park Circle Dr
Kalamazoo, MI 49048
phone: (269)381-5800

Terms & Conditions | Privacy Policy