Zeigler Motorsports Family

2017 KTM 150 SX

2017 KTM 150 SX
Orange
MSRP: $6,999.00
Manufacturer: KTM
Condition: New

Description

With the agility of a 125 and enough muscle to take the fight to the 250cc 4-strokes, this bike punches well above its weight. Its snarling engine sets benchmarks in terms of power and torque, rocketing its state-of-the-art chassis miles ahead of the competition. The top step of the podium does have the unmistakable scent of 2-stroke premix exhaust.

Specifications

ENGINE

DESIGN
1-cylinder, 2-stroke engine
DISPLACEMENT
143.99 cm³
BORE
58 mm
STROKE
54.5 mm
STARTER
Kickstarter
TRANSMISSION
6-speed
PRIMARY DRIVE
23:73
SECONDARY GEAR RATIO
13:48
CLUTCH
wet multi-disc clutch, Brembo hydraulics
EMS
Kokusan
 

CHASSIS

FRAME DESIGN
25CrMo4 steel central-tube frame
FRONT SUSPENSION
WP-USD, AER 48, Ø 48 mm
REAR SUSPENSION
WP shock absorber with linkage
SUSPENSION TRAVEL (FRONT)
310 mm
SUSPENSION TRAVEL (REAR)
300 mm
FRONT BRAKE
Disc brake
REAR BRAKE
Disc brake
FRONT BRAKE DISC DIAMETER
260 mm
REAR BRAKE DISC DIAMETER
220 mm
CHAIN
5/8 x 1/4"
STEERING HEAD ANGLE
63.9 °
WHEELBASE
1485 ± 10 mm
GROUND CLEARANCE
375 mm
SEAT HEIGHT
960 mm
TANK CAPACITY (APPROX.)
7 l
WEIGHT READY TO RACE (WITHOUT FUEL)
87.2 kg
 

Features

AGILE ATHLETE

  • FEATHERWEIGHT The main target for the KTM engineers when developing the SX models was a massive weight reduction compared to the previous generation. The result: the current SX models are the slimmest, lightest bikes on the track.
  • FOOTPEGS Sophisticated ´No Dirt´ footpegs prevent clogging of the footpeg pivot, even when digging in deep ruts. Looking for a higher riding position? Then just mount the footpegs of the MY2017 EXC models, which are 6mm higher than the SX versions.
  • FRAME The high-tech, lightweight chrome-moly steel frame is engineered for excellent handling, precise cornering and supreme stability. You can also count on high torsional rigidity and low longitudinal stiffness for better absorption of the energy created by the front and rear suspension sucking up jumps and bumps. In short: more comfort and less rider fatigue. Laterally attached, lightweight engine head stays contribute to a reduced vibration level. The engineers were able to pull off all that, while making the frame two pounds lighter than that of the lightest competitor on the market. In addition, the frame is easier to maintain, easier to work on and supplies more space for the tank and other components. The bike also features an extra-light aluminum subframe, which weighs in at less than 2 pounds.
  • AIRBOX The airbox design offers maximum protection of the air filter while ensuring maximum airflow. The large twin-air filter is mounted in a stiff cage, which at the same time holds the system in place. This design is so simple you could still pop a fresh one in with a face full of mud. Without tools. In seconds.
  • HANDLEBAR KTM engineers sure know how to handle handlebars. This tapered one, made of high-strength aluminum by NEKEN, is fixed in damped rubber mounts and has two different positions. From 2017 onwards, the lower handlebar clamps are separated, while on the upper side a new bridge-type clamp guarantees more torsional stiffness. It’s also easier to replace the bar in case it gets twisted in a nasty crash. ODI lock-on grips make grip changes easy which does not require any wire or glue to be secured.
  • FUEL TANK A lightweight polyethylene tank has a capacity of 1.85 gallons. The filler cap has an inside thread, which makes for easy and reliable closure.
  • SWINGARM The cast aluminum design offers low weight and a perfect flex behavior. The single-component casting process eliminates any inconsistencies and inherent weak points created by welding. It’s better looking as well.
  • WHEELS Featuring lightweight, CNC machined hubs and high-end Excel rims, they guarantee maximum stability and minimal unsprung weight. The wheels are shod with the latest Dunlop Geomax MX 3S tires.
  • SEAT Tailored to meet the needs of the world’s fastest racers, this durable seat offers great comfort. For 2017, a new cover gives its riders even more grip with better feel.
  • COOLING SYSTEM KTM’s proven cooling system routes the coolant from the cylinder head through the frame triangle, directly to aluminum radiators made by WP. A new filler cap system and are stiffer alloy construction increase the durability and reliability of the cooling system. Due to flow optimized internal circulation and CFD-calculated air ventilation, the system is superbly efficient. In addition, well thought-out radiator guards integrated in the front part of the shrouds provide protection in a crash.

ALWAYS ON TOP OF THINGS

  • MONOSHOCK The WP monoshock has been developed with the entire frame and swingarm architecture in mind, including the linkage system and the WP AER 48 front forks. It features machined and black anodized components and is a valuable, high-end product compared to roughcast reservoirs. A new setting and a softer spring perfectly match the reworked front-end set-up and its sparkling WP color scheme lets everyone know you have excellent taste in suspension.
  • FORKS The lightweight WP AER 48 front fork, a 48mm USD air-sprung fork developed by WP in close collaboration with KTM, is a split fork with separate functions for each leg. That means damping functions are on the right side, whereas the air spring is in the left. This left leg features a two-chamber system with a capsuled air cartridge to prevent loss of air pressure. The air spring is easy to adjust to any rider weight via a single air valve. No special tools are required; just the air pump provided with the bike. The right fork leg integrates a damping cartridge that tailors to all your damping needs. It can be adjusted to the track conditions and the rider’s preferences with a twist of a dial (compression from the top, rebound from the bottom, 30 clicks each). For 2017, the AER 48 also features redesigned outer tubes with better flex characteristics, smoother operation and less friction. And they are 3 pounds lighter than the 4CS units they replace. Right off the dealer floor, these forks are more comfortable and more sensitive than ever. But you can still hammer the hell out of them.
  • BRAKES You can’t brake any harder, better, faster or stronger. These high-tech Brembo babies are combined with lightweight wave discs made by Galfer. For 2017, the rear brake features a 10mm longer brake pedal and you get new, less aggressive brake pads all round.
  • TRIPLE CLAMP Top quality, CNC machined triple clamps have been a KTM trademark for years to ensure precise handling. For 2017, the upper triple clamp specifically features a redesign in conjunction with the new fork tubes. The rubber damped handlebar mount has also been reworked and the lower handlebar clamps are now separated, while on the upper side a new bridge-type clamp guarantees more torsional stiffness and can easily be replaced in case it gets twisted due to a crash. In addition, an hour meter is fitted at the upper triple clamp in order to let the rider know it’s time for a service.

LESS IS MORE

  • ENGINE The engine of the 150 SX was developed with the latest know-how and state-of-the-art technology. That’s the only way to craft class-leading power all across the rev range. This is the lightest and most compact 150cc engine you’ll find. So prepare for surprisingly fast lap times and baffling speed. As this motorcycle shares many of its key components with the class-leading 125 SX, the cylinder; the 150 SX’s head and piston unit can now also be fitted on a 125cc engine base to convert it to a 150 SX without replacing the crankshaft. Buy one, get one free. Nearly.
  • CYLINDER This compact cylinder with a 58mm bore features a cutting-edge power valve unit with a sophisticated mechanism for the lateral support exhaust ports. Matched to a twin-component cylinder head, it is KTM’s secret to all-round grunt. The layout of the water jackets in the cylinder and head guarantees efficient heat dissipation when the going gets tough.
  • CRANKSHAFT This reliable piece of engineering has been skillfully balanced to guarantee minimal vibrations. In its latest form, it allows a decrease of the displacement to 125cm3 just by replacing cylinder, piston and head. There’s no longer the need to change the crankshaft if you want to change displacement. Two-in-one in no time.
  • ENGINE CASES For the latest engine generation the KTM engineers designed lightweight die-cast engine cases featuring a high crankshaft position located close to the center of gravity, which results in optimal mass centralization and outstanding rideability. In addition, the engine is extremely compact while still able to house an optional electric starter.
  • CARBURETOR As of model year 2017, all KTM 2-stroke models are fitted with new MIKUNI TMX carburetors, replacing the Keihin products. This 38mm flat slide carb lives to provide smooth and controllable power all the way up to the limit. And it’s less sensitive to different altitudes and temperatures, so you can pin it wherever, whenever.
  • TRANSMISSION A robust 6-speed transmission was designed specifically for the small 2-stroke engine, its gear ratios are perfectly in sync with the 150’s power band. The latest production technologies allow for compact dimensions and minimal weight. An advanced ´No Dirt´gear lever design prevents mud from clogging the folding tip for reliable shifts even in the worst conditions.
  • EXHAUST The engineers meticulously tuned the expansion chamber for maximum torque and power, so this screamer is as tough as it is strong.

LOOKS THAT MATTER

  • BODYWORK KTM R&D, Kiska Design and the factory racers had their say in shaping the plastics with one goal: complete harmony between rider and bike. Perfect ergonomics and contact points provide maximum comfort in movement on the SX-F. The I-beam structures of the front and rear fenders guarantee maximum stability and a low weight thanks to well thought-out construction and mounting. They also stay cleaner for longer.
  • GRAPHICS New graphics convey the READY TO RACE character of the 2017 SX-F model line.

All inventory listed is subject to availability and prior sale. Manufacturer's Suggested Retail Price (MSRP) if shown for a vehicle excludes set-up, freight, taxes, title, licensing or other dealer charges, and is subject to change. Individual prices may vary. Please request a quote for specific pricing.

Request Quote or More Information








Cycle Parts Nation
5001 Park Circle Dr
Kalamazoo, MI 49048
phone: (269)381-5800

Terms & Conditions | Privacy Policy